Description
The AW-D135C Conventional manual call point is designed to be use with an intelligent two-wire
control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire
alarm control system which will, after receiving the alarm signal, display the equipment status of the
manual fire call points. When the manual fire call points is operating normally, the red indicator will blink;
when there is a fire alarm, it will remain lit.
Product characteristics
1 Semi-flush or surface mounting
2 Compatible with the latest EN standards
3 Lever reusable (non-glass break)
4 LED indicator
Start: When there is a fire manual confirmation, press the button on the panel of the AW-D135C(See Fig.5).
After the manual fire alarm is given, the ALARM indicator will remain lit.
Reset: The resetting key into the manual reset button on the side of the hole being depressed can make
restitution by piece, Reset the fire alarm control system and restore the AW-D135C to the normal monitoring
status.
1 Executive Standard: EN54-11
2 Protection class: IP30
3 Operating voltage: Zone 24V or 12V
4 Operating current: monitoring status≤20uA, alarm status≤15mA
5 Application: For indoor use
6 Operating temperature: -10℃~55℃,Relative humidity: ≤95%(non-condensing)
7 Indicator: Red alarm indicator flashes when it is under normal condition,press the manual button lit work
8 Materials and colors: ABS, red
9 Wiring: The promise of two bus system(Zone +, Zone -)
10 Size: 99mm*91.5mm*66.3mm
11 Mating Host: AW-FP100 addressable fire alarm control panel
12 Weight: about 95g